The GLP MAD MAXX is the first true fat-beam LED fixture with a massive 750 mm beam diameter, making it the only fixture comparable to 3kW and 7kW xenon beam lights. Designed for use as a sky beam or a super-fat beam effect for stages and events, the MAD MAXX produces a beam with no visible external focus points. The fully illuminated, wide light output—matching the beam’s diameter—is stunning and gives the fixture an imposing stage presence. A virtual iris allows users to adjust the beam diameter as needed.

The GLP MAD MAXX is the first true fat-beam LED fixture with a massive 750 mm beam diameter, making it the only fixture comparable to 3kW and 7kW xenon beam lights.

Designed for use as a sky beam or a super-fat beam effect for stages and events, the MAD MAXX produces a beam with no visible external focus points. The fully illuminated, wide light output—matching the beam’s diameter—is stunning and gives the fixture an imposing stage presence. A virtual iris allows users to adjust the beam diameter as needed.

For vibrant and intense color variety, the color wheel provides access to a 16-bit color wheel with blendable CTO down to 2500 K and 18 fixed colors. Alongside a simple base mode, the MAD MAXX also features segment or multi-beam modes, allowing individual control of the three LED segments or the 19 individual beams. The pattern mode enables quick selection of static bicolor or dynamic single-color pattern effects.

Compared to alternative 3kW or 7kW xenon fixtures typically used for this effect, the MAD MAXX is highly compact and requires no high-power infrastructure. Consuming only 2,500 W, it can easily be connected to standard power distribution networks.

The IP65 rating makes the MAD MAXX perfect for temporary use in harsh environments. Wind, rain, dust, dirt, fog fluid, or confetti cannot impact the device. Its low-maintenance LED technology and robust mechanical design ensure years of worry-free operation, as users have come to expect from GLP products.

Being a 100% LED source fixture, the GLP MAD MAXX avoids all the health risks, safety distances, permits, and other complications associated with laser-based devices.

Light Source

  • Type – 19 White LEDs
  • Light source power – 90 W
  • Light Source Lifetime – 20,000 hours
  • LED Refresh Rate
    • Low: 550Hz
    • Optimal: dynamic PWM algorithm
    • High 1: 4,600 Hz
    • High 2: 13,000 Hz
    • All values rounded; for detailed information, contact GLP Support
  • CCT – 6500K
  • CRI (Ra) – 70+ : With High CRI; 90

 

Control & Programming

  • Control Modes – 4
  • Protocol – 
    • DMX (USITT DMX512-A)
    • RDM (ANSI/ESTA E1.20)
    • Art-Net
    • sACN
    • GLP iQ.Mesh
    • Lumen Radio CRMX/RDM
  • Setting and addressing
    • control panel with backlit graphic display
    • 4 Button Menu Navigation
    • DMX
    • RDM
    • iQ.Service App
    • NFC via iQ.Service App
  •  Software Update – 
    • DMX link via DPROG
    • GLP iQ.Mesh
    • GLP iQ Tool
  • High-Res Channels 
    • Intensity
    • Pan
    • Tilt
    • Color Wheel
  • Performance Modes – 
    • fast
    • normal (balanced)
    • smooth
  • Dimming Curves – 
    • linear
    • soft
    • S-Curve

Dynamic Effects

  • Dimmer – 
    • 0 – 100%; 16 bit electronic
  • Shutter – 
    • Variable speed strobe, with effects
  • Color wheel – 
    • 19 filters total, including CTO (approx. 3,800 K) and 18 colors
  • Pan Movement Angle540° normal (650° extended), 16 bit resolution
  • Tilt Movement Angle200°, 16 bit resolution

 

Connections

  • Signal connection – 
    • Neutrik XLR 5-Pin In/Out
    • Neutrik etherCON port A & B (failsafe)
  • Power connection – 
    • Neutrik powerCON TRUE1 input

 

Electrical Specifications

  • Power input
    • 180 – 240 VAC / 50 – 60Hz
  • Power supply – 
    • auto-ranging electronic switch-mode
  • Max. power (@230V) – 2,500 W

 

Optical System

  • Outputup to 68,000 lumens
  • Peak Luminous Intensity – 4.7 Mcd, single beam
  • Beam angle: 
    • 1.6° fixed
  • Beam Diameter – 29.53 inches / 750 mm

 

Installation

  • Mounting – 
    • optional omega brackets for horizontal truss mounting
    • eyelets for safety cable
  • Orientation – 
    • Floor mounted on base or hung horizontally only
  • Location – 
    • indoor permanent
    • outdoor temporary

 

Thermal Specifications

  • Cooling
    • Combined convection and forced air
  • Automatic overheating protection
  • Max. surface temperature (Ta = 40°C):  115 °F / 45 °C
  • Min. ambient temperature (Ta min.):  14 °F / – 10 °C 
  • Total heat dissipation (calculated, +/-10%):  – 8,500 BTU/hr

 

Construction

  • Housing Color
    • Black
  • Housing Material
    • high-impact flame-retardant thermoplastic
    • aluminum
    • steel metal plates

    Protection Rating – 

    • IP 65

    Construction Features

    • base with stable standing surface
    • pan lock and tilt lock
    • base handles
    • lifting eyelets on yoke
    • mechanical sun protection
    • accessory port for external accessories

 

Dimensions

  • Height – 41.6 in. / 1,057 mm
  • Height (Head Vertical) – 49.1 in. / 1,248 mm
  • Width – 41.1 in. / 1,043 mm
  • Length – 31.1 in. / 789 mm
  • Length (Head Vertical) – 20.8 in. / 528 mm

 

Net Weight

  • Weight – 458.6 lbs. / 208 kg

Manual

PDFIcon Safety and Warranty Information for GLP Outdoor Fixtures

PDFIcon GLP Mad Maxx Air Traffic Control Information Rev20250617

 

DMX

PDFIcon GLP MAD MAXX DMX Channel Index Rev20250523-1

 

CAD

ZIPIcon GLP MAD MAXX Vectorworks Rev20250522-1

ZIPIcon GLP MAD MAXX CAD Rev20250516-1

 

Photometrics

Coming Soon

 

GDTF Files

For GLP GDTF fixture files, please visit the following link:
https://gdtf-share.com/user-page?name=German+Light+Products&page=fixtures

 

Tender Text

ZIPIcon GLP MAD MAXX Tender text EN DE Rev 20250617-1

 

Specifications

PDFIcon Mad Maxx Datasheet-Rev20250617

News